Birla Institute of Technology, Mesra
Vimal Kumar Singh Yadav
Assistant Professor, Electronics and Communication Engg
M.Tech. (Tezpur University), PhD (IIT Guwahati) 		Contact Address
Permanent Address GHAZIPUR UP
Local Address BIT MESRA RANCHI
Phone (Office) 1
Phone Residence 1
Email Id vimalsuryadev@bitmesra.ac.in
Joined Institute on : 1-Sep-2021
  Work Experience
 
Teaching : 1 Years

Research : 7 Years

Individual: 7 Years
  Research Areas
 

Printed Nano-Electronics

Nano-Device Fabrication, Modeling and Simulation

Sensors

Magnetic Devices

Optoelectronics
  Award and Honours
 

 

 

  • Session Chair in 7th International Conference on Microelectronics Computing & Communication Systems (MCCS-2022) organised by (ISVE), Ranchi, 09-10 July 2022.
  • Session Chair in 2nd International Conference on Nanoelectronics, Machine Learning, Internet of Things and Computing Systems (NMIC-2022) organised by Indian Society for VLSI Education (ISVE), Ranchi, 23-24 April 2022.
  • Mentor and member of organizing committee for National Level Exhibition and Project Completion (NLEPC) for Jharkhand state organised by National Innovation Foundation (NIF), DST, Govt. of India, 22-23 March 2022.
  • Session Chair in 7th International Conference on Nanoelectronics Circuits & Communication Systems (NCCS-2021) organised by Indian Society for VLSI Education (ISVE), Ranchi, 29-30 January 2022.
  • Session Chair in 2nd International Conference on Microelectronics, Communication Systems, Machine Learning & Internet of Things (MCMI-2021) organised by Indian Society for VLSI Education (ISVE), Ranchi, 23-24 October 2021.
  • SERB NPDF Fellowship (Approved) to carry out project at IISc, Bengaluru, India, 2021.
  • Ministry of Human Resource Development, Govt. of India Grant for 5 Years Ph.D. Program at IIT Guwahati, Assam (2014 to 2019).
  • Ministry of Human Resource Development, Govt. of India Grant for 2 Years M.Tech. Program at Tezpur University, Assam (2012 to 2014).
  • Winner of the Technical Quiz Competition during 2nd National Workshop on NEMS/MEMS and Theranostic Devices organized by Center for Nanotechnology, IIT Guwahati (21-22 March 2016)
  • Offered the post of Associate Software Engineer by IBM-GBS, 2013
  Publications
 

Book Chapter
  1. V.K.S. Yadav, Roy Paily, “Effect of pH Variations on Zinc Oxide (ZnO) Nanowire Dispersions”, In: Mallick P.K., Meher P., Majumder A., Das S.K. (eds) Electronic Systems and Intelligent Computing, Lecture Notes in Electrical Engineering, vol. 686. pp 949-955, 2020, Springer Nature Singapore. https://doi.org/10.1007/978-981-15-7031-5_90. Print ISBN 978-981-15-7030-8, Online ISBN 978-981-15-7031-5.

Journals
  1. V. K. S. Yadav, G. Natu and R. Paily, “Analysis of Superfine-Resolution Printing of Polyaniline and Silver Microstructures for Electronic Applications,” IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 8, no. 9, pp. 1678-1685, Sept. 2018, DOI: 10.1109/TCPMT.2018.2854629. (Citation: 10, I.F: 1.922). Link: https://ieeexplore.ieee.org/abstract/document/8408820.
  2. V. K. S. Yadav, G. Natu and R. Paily, “Fabrication and Electrical Characterization of Printed Micro-Resistors of Silver Nanoparticles Using Micro-Cantilever Based Printing Technology,” IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 10, no. 1, pp. 57-64, Jan. 2020, DOI: 10.1109/TCPMT.2019.2954079. (Citation: 6, I.F: 1.922). https://ieeexplore.ieee.org/abstract/document/8906178.
  3. V. K. S. Yadav, T. T. Daniel and R. Paily, "Gas Sensors Based on Drop-Casted ZnO Nanowires and Micro-Cantilever Printed Ag Contacts," IEEE Sensors Journal, vol. 20, no. 9, pp. 4951-4958, 1 May 2020, DOI: 10.1109/JSEN.2020.2964600. (Citation: 10, I.F: 4.325). https://ieeexplore.ieee.org/abstract/document/8951061.
  4. V. K. S. Yadav, S. Raveesh, T. T. Daniel and R. Paily, "Microcantilever Printed Back-to-Back ZnO Single-Nanowire Schottky Diodes," IEEE Transactions on Electron Devices, vol. 67, no. 8, pp. 3309-3314, Aug. 2020, DOI: 10.1109/TED.2020.3002733. (Citation: 6, I.F: 3.221). https://ieeexplore.ieee.org/abstract/document/9127131.
  5. T. T. Daniel, S. Majumder, V. K. S. Yadav and R. Paily, "Magnetite-Based Resistor for Nitric Oxide Detection," IEEE Sensors Journal, vol. 20, no. 22, pp. 13341- 13348, 15 Nov. 2020, DOI: 10.1109/JSEN.2020.3005398. (Citation: 4, I.F: 4.325). https://ieeexplore.ieee.org/abstract/document/9127506.
  6. V. K. S. Yadav, T. T. Daniel, S. Raveesh and R. Paily, “Room Temperature Air Pollutants Sensors Using Printed ZnO Single-Nanowire Schottky Diodes,” IEEE Transactions on Nanotechnology, vol. 20, pp. 338-345, 2021. DOI: 10.1109/TNANO.2021.3071320. (Citation: 0, I.F: 2.967). https://ieeexplore.ieee.org/abstract/document/9397333.
  7. S. Raveesh, V. K. S. Yadav and Roy Paily, “CuO Single-Nanowire Based White-Light Photodetector,” IEEE Electron Device Letters, vol. 42, no. 7, pp. 1021-1024, July 2021. DOI: 10.1109/LED.2021.3081627. (Citation: 1, I.F: 4.816). https://ieeexplore.ieee.org/abstract/document/9433578.
  8. Thomas T Daniel, V. K. S. Yadav, Gayatri Natu and Roy Paily, “Fully Printed Inorganic Schottky Diode”, IEEE Electron Device Letters, vol. 42, no. 8, pp. 1212-1215, August 2021. DOI: 10.1109/LED.2021.3086849. (Citation: 1, I.F: 4.816). https://ieeexplore.ieee.org/abstract/document/9447769.
  9. Thomas T Daniel, V. K. S. Yadav, Emlin Elsa Abraham, and Roy Paily, “Carbon Monoxide Sensor Based on Printed ZnO”, IEEE Sensors Journal, vol. 22, no. 11, pp. 10910 - 10917, June 2022. DOI:  10.1109/JSEN.2022.3166811. (Citation: 1, I.F: 4.325). https://ieeexplore.ieee.org/abstract/document/9755961.
  10. Raveesh Siddaramaiah, V. K. S. Yadav, Ayan Pal, and Roy Paily Palathinkal. "High-performance CuO nanowire printed devices for visible light sensing and switching characteristics." Materials Letters, pp. 132300, 2022. (Citation: 0, I.F: 3.574).  https://www.sciencedirect.com/science/article/abs/pii/S0167577X2200653X.

International/ National Conferences
  1. Joshua Roy Palathinkal, Sumit Majumder, Thomas T Daniel, V. K. S. Yadav, Roy Paily Palathinkal, “Fabrication of SeFe2O3-based Schottky diode using Cantilever-based Ag-contact Printing Technology,” 33rd SEMI Advanced Semiconductor Manufacturing Conference (ASMC 2022), New York, USA, May 2-5, 2022. (Published) https://ieeexplore.ieee.org/abstract/document/9792480.
  2. V.K.S. Yadav, Thomas T. Daniel and Roy P. Paily, “Electrical Characterization and Analytical Modeling of ZnO Single-Nanowire Based Schottky Diode,” 6th International Conference on Advanced Nanomaterial and Nanotechnology (ICANN 2019), IIT Guwahati, India, December 18-21, 2019 (Presented).
  3. V.K.S. Yadav and Roy P. Paily, “Optimization of Zinc Oxide (ZnO) Nanowire Dispersion for Single Nanowire Device Fabrication,” XXth International Workshop on Physics of Semiconductor Devices (IWPSD), Kolkata, India, December 17-20, 2019 (Accepted).
  4. V.K.S. Yadav, S. Roy. G. Natu and Roy P. Paily, “Fabrication of Back-to-Back Schottky Micro-Diodes Using Silver Nanoparticle Film and Zinc Oxide Nanowire Mat for Biological Interactions,” IEEE TENCON, Kochi, India, October 17-20, 2019. DOI: 10.1109/TENCON.2019.8929710 (Published). (Citation: 1). https://ieeexplore.ieee.org/abstract/document/8929710.
  5. V.K.S. Yadav, G. Natu and Roy P. Paily, “Fabrication and Electrical Characterization of Voltage Dependent Micro-Resistors (Micro-Varistors) Using Silver Nanoparticle and Zinc Oxide Nanowire Film,” 5th National Workshop on NEMS/MEMS and Theranostics Devices (NWNTD), IIT Guwahati, India, February 2019 (Presented as poster).
  6. V.K.S. Yadav, G. Natu and Roy P. Paily, “Electrical Characterization of Nano-Level Printed Resistors of Silver Nanoparticles for Sensing Applications,” Research Conclave, Indian Institute of Technology Guwahati, Assam, India, March 2018 (Oral Presentation).
  7. V. K. S. Yadav and R. K. Baruah, "An analytic potential and threshold voltage model for short-channel symmetric double-gate MOSFET," 18th International Symposium on VLSI Design and Test (VDAT), Coimbatore, India, 2014, pp. 1-2, DOI: 10.1109/ISVDAT.2014.6881048 (Published). (Citation: 5). https://ieeexplore.ieee.org/abstract/document/6881048.

 Poster Presentations

V. K. S. Yadav, "Micro-Cantilever Printing Based Devices and Applications," National Technology Day, Institutions Innovation Council (IIC)-BIT Mesra, Ranchi, Jharkhand, India, 11 May 2022 (Presented)

 

Invited technical talks
  • IEEE Webinar on “Printed Electronics-The Technology of the Hour”, jointly organized by IEEE Student Branches of Raghu Institute of Technology, Visakhapatnam and University College of Engineering, Vizianagaram (A), JNTU Kakinada, 08 May 2021.
  • Invited lecture on “Micro-Cantilever printing of Devices and simulation using TCAD” in One-week Hands-on Training Workshop on “Nanostructured Materials and Devices: Fabrication, Characterization and Applications”, organized by the Department of Physics, Birla Institute of Technology Mesra (BIT Mesra), Ranchi under the banner of DST-STUTI Program of Indian Institute of Technology (ISM) Dhanbad funded by Department of Science and Technology (DST), Government of India.

 
  Member of Professional Bodies
 

Member, IEEE